Grout is necessary for tile installation, especially to slick up your kitchen or bathroom tile backsplash. Infact, it makes your stone, ceramic, and glass tiles stand out by protecting them from wear and tear.
Getting your tile grouting done by any professional is always a win-win for a gorgeous long-run placement. However, this job might not be as daunting as it sounds if you want to scrimp and save with high spirits.
If you’re looking to give your kitchen a fresh new look, a tile backsplash can be a great way to do it. However, to achieve a polished and professional finish, it’s important to know how to properly grout your tiles. In Fairfax, VA, there are many skilled professionals who can help with this task, but if you’re looking to tackle it yourself, we’ve got you covered. In this guide, we’ll walk you through the steps on how to grout a tile backsplash like a pro, ensuring a beautiful and long-lasting finish for your kitchen.
SCHEDULE SERVICE FROM YOUR FAIRFAX LOCAL HANDYMAN & HOME IMPROVEMENT SPECIALIST!
5 Steps For Grouting Tile Backsplash
Tools and tile preparation are compulsory things before actually starting the tile grouting process.
Let’s have a brief look at them; Grouting Materials and Tools
1- Grout powder
2- Grout sealant
3- Grout spraeder/ trowel
4- Mixing stick
5- Small mixing bucket
6- Towel / cloth
7- Masking paper / old newspaper
8- Painter tapes
9- Buffing rage
Grouting a tile backsplash can seem like a daunting task, but with the right tools and technique, you can achieve a professional-looking finish.
Read also: Expert Kitchen Remodeling Fairfax VA
Read Our Latest Posts:
1- How Much Does Roof Inspection Cost In Fairfax VA?
2- Fairfax VA Bathroom Remodeling Checklist?
3- Should I Paint Trim Or Walls First?
4- Should You Caulk Before Or After Painting?
5- Built-In Desk Ideas For Home & Office?
Here’s a step-by-step guide on how to grout a tile backsplash like a pro in Fairfax, VA:
1. Prepare the Area
Before starting the process, it’s always better to cover the area you don’t want to be messed up. For that, you can use masking paper and painter tapes, especially when the tiling is close to countertops or cabinets.
Moreover, make sure you remove all the dirt and debris from the joints of the tiles that you’re going to work on for a seamless appearance. And this takes us to the next step.
2. Mix the Grout
Once you have selected suitable grout color and type for your space, take a bucket and pour some water into it. Add a little bit of grout powder to the water and mix thoroughly until it forms a smooth paste. The consistency of your mixture should be similar to that of yogurt.
Tip: don’t add too much or too less water, as it will ruin the consistency and strength of grout.
Related: Kitchen Remodeling Cost Fairfax
3. Apply the Grout
Once you are ready to apply the grout, dip your sponge into the mixture and spread it onto the tile in a thin layer. You may need more than one sponge for this step, depending on how large your area is. Hold the grout spreader or trowel at a 45-degree angle and apply grout on the tiles’ small sections. Working diagonally will push the grout quickly and perfectly into tiles before it gets dry without a proper finish.
Tip: different grouts take much or less time for drying, so make sure you give it enough time (as mentioned on the packaging) for drying before moving to the next step.
4. Wipe down the Tiles
Pick a damp sponge and gently wipe the tiles in a circular motion to remove the excess grout. You can also use a cloth or towel to clean it thoroughly.
Tip: Always use a damp sponge because a wet sponge clears away the entire grout lining, and you will end in smoke.
5. Seal the Grout
Sealing/caulking the grout with a sealant makes the tiles water-resistant, specifically your bathroom and kitchen backsplashes, increasing the grout life for longer. You can use a sealant that is specifically made for grout, or you can use an all-purpose sealant that’s designed for concrete and stone surfaces. To apply the sealant, brush it into the grout lines with a small paintbrush or roller.
Tip: follow the instructions mentioned on the grout sealant before using it.
6. Leave to Dry
Let the tile backsplash grout dry completely. If you feel the tiles look dull and hazy, a buffing rage can help regain the original shine and sparkle. Finally, remove all the masking paper and painter tape and give a pat on your shoulder.
7. Clean Excess Grout
Once you have finished applying the grout to a section, wait for about 15 to 20 minutes to allow the grout to set slightly. Then, dampen a grout sponge and gently wipe away the excess grout from the tiles in a diagonal motion.
8. Final Cleaning
After wiping away the initial grout haze, continue cleaning the tiles with a clean, damp sponge until the tiles are free from any grout residue. Be gentle during this process to avoid disturbing the freshly applied grout.
9. Remove Painter’s Tape (If Used)
If you used painter’s tape to protect adjacent surfaces during grouting, carefully remove the tape once the grout is dry to the touch.
APPOINT US FOR TILE GROUNTING
Explore our other Services Areas in Northern Virginia.
1. Handyman Drywall Repair and Finishing
2. Rot Wood Replacement and Repair
3. Tile Installation & Repairs
4. Handyman Pressure Cleaning Services
5. Door Installation & Repair
6. Handyman Painting Services
Best Grout for Kitchen and Bathroom Backsplash
When it comes to the kitchen and bathroom, epoxy and cement-based grout (available in sanded and unsanded form) should be your priority. However, sanded epoxy grout is a durable option for areas exposed to extensive water, grease, oil splashes, and other damages.
Grout Color and Sealent for Kitchen and Bathroom Backsplash
You should either choose completing or contrasting shades for the tile backsplash. The complementary grout enhances the beauty of your tiles, while contrasting grout emphasizes the pattern of the tiles providing a neat and fresh layout.
Related Article How To Calculate An Estimate For Handyman Services?
For grout sealant, we suggest neutral shades, mainly white and grey, as they will give an arresting look to the tile backsplash.
If you need assistance on how to grout tile backsplash or with tile installation and repair, reach out to Jim the handyman professional, for the most pleasing work experience. Following these steps should help you achieve a professional-looking finish for your tile backsplash in Fairfax, VA. Good luck!
For more information Read our blog: Where Not To Caulk Around Windows